Evolve Contract Solutions | Reporting & Resolving Cleaning Issues Liverpool

Reporting and Resolving Issues

At our company, we take pride in providing high-quality contract cleaning services, and we are committed to ensuring that our clients are satisfied with the work we do. However, we understand that there may be times when the cleaning standards do not meet expectations.

If you ever experience a poor cleaning job, the following steps outline our process for reporting and rectifying the issue:

Report the issue

If you are not satisfied with the cleaning standards, please report the issue to us as soon as possible. You can do this by phone, email, or through our online reporting system.

Investigate the issue

Once we receive your report, we will immediately launch an investigation into the matter. Our team will assess the situation and determine the cause of the problem.

Communicate with you

We believe in open and honest communication, and we will keep you informed of our progress throughout the investigation. We will also provide you with a clear timeline for rectifying the issue.

Resolve the issue

Our team will take the necessary steps to rectify the issue, whether that be by retraining the cleaner, adjusting our cleaning procedures, or taking other appropriate action. We are committed to making sure that the issue does not happen again in the future.

Follow-up

After the issue has been resolved, we will follow up with you to ensure that you are satisfied with the outcome. We will also review our procedures to identify any areas where we can improve, and we will take action to prevent similar issues from happening in the future.

By following this process, we aim to ensure that any reported issues are resolved quickly and efficiently, and that we are providing the best possible cleaning services to our clients. Our goal is to maintain the highest standards of cleanliness and hygiene, and we are committed to working with our clients to achieve this. If you have any further questions or concerns, please do not hesitate to get in touch with us.

Make an Enquiry

A member of our team will be in contact with you shortly.

Enquire Now

SPECIFICATIONS AND DIMENSIONS

Baler Dimensions L X W x H	5695mm x 1385mm x 2190mm
Baler Weight Tonnes	5 Tonnes
Bale Size W x H	750mm x 1100mm
Bale Length	Variable
Bale Weight	450-650 Kgs depending on material
No of Bale Ties	4 Wire or Tape
Loading Aperture	1250mm x 750mm
Safety Circuits	Dual Channel Cat 4
Control Voltage	24 Volt
Switch Gear	PLC Controlled
Motor Size	11 Kw
Cylinder Bore	152mm
Compaction Force @ 200 bar*	38 Ton
Cutting Face on Baler Cross Bar	Serrated V Shape Blades
Cutting Face on Packing Blade	Anvil Shear Blades
End Door Type	Manual
Full Bale Eject of Each Individual Bale	Included
Cycle Time	74 Secs (Std) : 48 Secs (Optional)
CE Compliant	Yes

BALER DIMENSIONS

Height	1990 mm
Width	1800 mm
Depth	1100 mm
Weight	1140 Kgs
Power Supply	Single Phase 220-240V
Motor	2.2 KW 16 amp
Pressing Force	Up to 20 Tonnes
Noise Level	68 Decibels
Cycle Time	45 Seconds

LOADING APERTURE SIZES

Height	600 mm
Width	1200 mm
Depth	800 mm

BALE DIMENSIONS

Height	1000 mm
Width	1200 mm
Depth	800 mm
Weight	Up to 300 Kgs (Depending on material)

BALER DIMENSIONS

Height	2300 mm
Width	1040 mm
Depth	720 mm
Weight	270 Kgs
Transportation Ht	1800 mm
Power Supply	Single Phase 240v
Motor	1.5 KW 13 amp
Pressing Force	Up to 4 Tonnes
Noise Level	72 Decibels

LOADING APERTURE SIZES

Height	698 mm
Width	700 mm
Depth	500 mm

BALE DIMENSIONS

Height	600 mm
Width	700 mm
Depth	500 mm
Weight	Up to 75 Kgs
Cycle time	24 seconds

TECHNICAL SPECIFICATION

Motor	11 kW
Platen Force	50t
Cycle Time	32 sec
Electrical	415, 3-PHASE
Overall (W x D x H)	2030 x 1092 x 3620 mm
Feed Height	1232 mm
Loading Aperture	1524 x 705 mm
Bale (W x D x H)	1524 x 762 x 1220 mm
Bale Weight (OCC)	Up to 550 kg
Ejector System	Semi Automatic
Baler Weight	2045 kg

BALER DIMENSIONS

Height	1969 mm
Width	2050 mm
Depth	872 mm
Weight	562 Kgs
Transportation Ht	1969 mm
Power Supply	Single Phase 240v
Motor	1.3 KW 13 amp
Pressing Force	Up to 4 Tonnes
Noise Level	72 Decibels

LOADING APERTURE SIZES

Width	700 mm
Depth	500 mm

BALE DIMENSIONS

Height	1000 mm
Width	700 mm
Depth	500 mm
Weight	Up to 75 Kgs
Cycle time	35 seconds

BALER DIMENSIONS

Height	2300 mm
Width	1040 mm
Depth	720 mm
Weight	270 Kgs
Transportation Ht	1800 mm
Power Supply	Single Phase 240v
Motor	1.5 KW 13 amp
Pressing Force	Up to 4 Tonnes
Noise Level	72 Decibels

LOADING APERTURE SIZES

Height	698 mm
Width	700 mm
Depth	500 mm

BALE DIMENSIONS

Height	1000 mm
Width	700 mm
Depth	500 mm
Weight	Up to 75 Kgs
Cycle time	24 seconds

BALER DIMENSIONS

Height	2600 mm
Width	1560 mm
Depth	1030 mm
Weight	780 Kgs
Power Supply	Single Phase 240v
Motor	2.2 Kw
Pressing Force	Up to 10 Tonnes
Noise Level	72 Decibels

LOADING APERTURE SIZES

Height	470 mm
Width	975 mm

BALE DIMENSIONS

Height	1000 mm
Width	975 mm
Depth	800 mm
Weight	Up to 150 Kgs
Cycle time	40 seconds

BALER DIMENSIONS

Height	2469 mm
Width	3032 mm
Depth	1269 mm
Weight	1400 Kgs
Transportation Ht	2469 mm
Power Supply	Single Phase 240v
Motor	2.2 KW 16 amp
Pressing Force	Up to 22 Ton
Noise Level	74 Decibels

LOADING APERTURE SIZES

Width	1074 mm
Depth	800 mm

BALE DIMENSIONS

Height	1000 mm
Width	1074 mm
Depth	800 mm
Weight	Up to 250 Kgs
Cycle time	34 seconds

BALER DIMENSIONS

Height	2990 mm
Width	1500 mm
Depth	980 mm
Weight	985 Kgs
Transportation Ht	2250 mm
Power Supply	Single Phase 240v
Motor	2.2 KW 16 amp
Pressing Force	Up to 20 Tonnes
Noise Level	74 Decibels

LOADING APERTURE SIZES

Height	678 mm
Width	1200 mm
Depth	800 mm

BALE DIMENSIONS

Height	1000 mm
Width	1200 mm
Depth	800 mm
Weight	Up to 250 Kgs
Cycle time	34 seconds

DIMENSIONS

Height	2120 mm
Width	1160 mm
Depth	1150 mm
Weight	270 Kgs
Transportation Ht	1650 mm
Power Supply	Single Phase 240v
Motor	1.5KW 13 amp
Pressing Force	Up to 4 Tonnes
Noise Level	72 Decibels
Cycle time	20 seconds

Model Type	ET-16ST	ET-18ST	ET-20ST	ET-22ST	ET-24ST
Motor	5.5kW	5.5kW	5.5kW	5.5kW	5.5kW
Supply 3ø50~415V	16A	16A	16A	16A	16A
Compaction Force	34t	34t	34t	34t	34t
Cycle Time	52 sec	52 sec	52 sec	52 sec	52 sec
Capacity	16m³	18m³	20m³	22m³	24m³
Volume/stroke	1.31m³	1.31m³	1.31m³	1.31m³	1.31m³
Volume/hr	98m³	98m³	98m³	98m³	98m³
Length	5320mm	5520mm	5920mm	6400mm	6800mm
Length c/w tipper	7480mm	7680mm	8080mm	8560mm	8960mm
Width	2470mm	2470mm	2470mm	2470mm	2470mm
Height	2670mm	2670mm	2670mm	2670mm	2670mm
Filling Opening (L x W)	2000 x 1800mm	2000 x 1800mm	2000 x 1800mm	2000 x 1800mm	2000 x 1800mm
Filling Height	1130mm	1130mm	1130mm	1130mm	1130mm

TECHNICAL SPECIFICATION

Motor	5.5 kW
Power Supply	415V 3ø50~16A
Compaction Force	34t
Cycle Time	35 sec
Capacity	8-12m³
Filling Opening (L x W)	900 x 1510 mm
Filling Height	1230 mm
Volume /stroke	1m³
Volume/hr	100m³
Total (L x W x H)	4.2 x 1.9 x 2.1m

Type	ET-15S	ET-15	ET-20	ET-25	ET-30
Motor	7.5kW	7.5kW	11kW	11kW	11kW
Supply 3ø50~415V	32A	32A	32A	32A	32A
Compaction Force	34t	34t	38t	38t	38t
Cycle Time	39 sec	40 sec	50 sec	55 sec	60 sec
Volume/hr	103m³	96m³	140m³	180m³	240m³
Length	1828mm	3035mm	3724mm	4413mm	5102mm
Width	1753mm	1753mm	1753mm	1753mm	1753mm
Width inc S/M P/Pack	2007mm	2007mm	2007mm	2007mm	2007mm
Height ex Hopper	1220mm	1220mm	1220mm	1220mm	1220mm
Filling Opening (L x W)	1066 x 1524mm	1029 x 1524mm	1372 x 1524mm	1715 x 1524mm	2040 x 1524mm
Filling Height	1220mm	1220mm	1220mm	1220mm	1220mm

Type	ET-15S	ET-15	ET-20	ET-25	ET-30
Motor	7.5kW	7.5kW	11kW	11kW	11kW
Supply 3ø50~415V	32A	32A	32A	32A	32A
Compaction Force	34t	34t	38t	38t	38t
Cycle Time	39 sec	40 sec	50 sec	55 sec	60 sec
Volume/hr	103m³	96m³	140m³	180m³	240m³
Length	1828mm	3035mm	724mm	4413mm	5102mm
Width	1753mm	1753mm	1753mm	1753mm	1753mm
Width inc S/M P/Pack	2007mm	2007mm	2007mm	2007mm	2007mm
Height excl. Hopper	1220mm	1220mm	1220mm	1220mm	1220mm
Filling Opening (L x W	1066 x 1524mm	1029 x 1524mm	1372 x 1524mm	1715 x 1524mm	2040 x 1524mm
Filling Height	1220mm	1220mm	1220mm	1220mm	1220mm

Get a Quote

Contract Cleaning

Reporting and Resolving Issues

Report the issue

Investigate the issue

Communicate with you

Resolve the issue

Follow-up

Make an Enquiry