At Evolve Contract Solutions, we specialise in providing high-quality jet-washing services tailored to meet surface cleaning needs. Our team of professionals is equipped with the latest equipment and techniques to ensure a thorough cleaning that revives the look of your surfaces while maintaining safety standards.
1. Flat Surface Jet Washing
Ideal for surfaces like tarmac, concrete, slate, stone, and block paving. We specialise in removing dirt, moss, algae, and other build-ups to restore the original look and feel of your surfaces. Regular jet washing helps to preserve these surfaces, extending their lifespan and maintaining a fresh appearance.
2. Graffiti Removal
Ideal for surfaces like tarmac, concrete, slate, stone, and block paving. We specialise in removing dirt, moss, algae, and other build-ups to restore the original look and feel of your surfaces. Regular jet washing helps to preserve these surfaces, extending their lifespan and maintaining a fresh appearance.
3. Soft Wash Render Cleaning
Our soft wash render cleaning service is perfect for delicate surfaces like render, stone, or cladding. Using low-pressure methods, we safely remove dirt, mould, and stains, preserving the quality and colour of the surface.
4. Jet Wash Cladding
Keep your building’s cladding looking professional with our jet wash cladding service. This method effectively removes dirt, algae, and other pollutants that accumulate over time, ensuring your cladding stays clean and well-maintained.
Health and Safety Regulations
At Evolve Contract Solutions, health and safety are paramount in everything we do. We strictly adhere to industry standards and regulations to ensure a safe working environment for both our team and our clients. All our operatives are trained in the safe use of jet-washing equipment and follow best practices.
Personal Protective Equipment (PPE)
All staff members involved in jet washing services are required to wear the following PPE to ensure safety:
• Eye Protection: Safety goggles or face shields are worn to protect against debris or water spray that can cause eye injuries.
• Hearing Protection: Jet washing equipment operates at high noise levels, so hearing protection such as ear defenders or earplugs is mandatory.
• Protective Clothing: Waterproof and durable protective clothing, including long-sleeved jackets, trousers, and boots, is worn to shield against high-pressure water, cleaning agents, and debris.
• Safety Footwear: Non-slip, waterproof safety boots with steel toe caps are worn to protect heavy equipment and slippery surfaces.
• Gloves: Industrial-grade waterproof gloves are used to protect hands from prolonged exposure to water and chemicals.
Risk Assessments and Safe Working Procedures
• Surface Evaluation: Before starting any jet washing project, our team conducts a thorough risk assessment to identify any potential hazards, such as loose surfaces, trip hazards, or weak points in the structure.
• Chemical Handling: If cleaning agents are required, our team is trained to handle and apply chemicals safely, adhering to COSHH (Control of Substances Hazardous to Health) regulations.
• Work Area Preparation: All work areas are properly cordoned off with safety signage to prevent unauthorised access and minimise the risk of accidents.
• Equipment Safety: We ensure all jet washing machines and hoses are regularly inspected and maintained to prevent malfunctions. Only trained personnel operate the equipment.
Choose Evolve Contract Solutions for reliable, efficient, safe jet washing services. Whether tarmac, block paving, paving slabs, or concrete, we guarantee exceptional results with the utmost attention to safety and detail.
A member of our team will be in contact with you shortly.
Baler Dimensions L X W x H | 5695mm x 1385mm x 2190mm |
Baler Weight Tonnes | 5 Tonnes |
Bale Size W x H | 750mm x 1100mm |
Bale Length | Variable |
Bale Weight | 450-650 Kgs depending on material |
No of Bale Ties | 4 Wire or Tape |
Loading Aperture | 1250mm x 750mm |
Safety Circuits | Dual Channel Cat 4 |
Control Voltage | 24 Volt |
Switch Gear | PLC Controlled |
Motor Size | 11 Kw |
Cylinder Bore | 152mm |
Compaction Force @ 200 bar* | 38 Ton |
Cutting Face on Baler Cross Bar | Serrated V Shape Blades |
Cutting Face on Packing Blade | Anvil Shear Blades |
End Door Type | Manual |
Full Bale Eject of Each Individual Bale | Included |
Cycle Time | 74 Secs (Std) : 48 Secs (Optional) |
CE Compliant | Yes |
Height | 1990 mm |
Width | 1800 mm |
Depth | 1100 mm |
Weight | 1140 Kgs |
Power Supply | Single Phase 220-240V |
Motor | 2.2 KW 16 amp |
Pressing Force | Up to 20 Tonnes |
Noise Level | 68 Decibels |
Cycle Time | 45 Seconds |
Height | 600 mm |
Width | 1200 mm |
Depth | 800 mm |
Height | 1000 mm |
Width | 1200 mm |
Depth | 800 mm |
Weight | Up to 300 Kgs (Depending on material) |
Height | 2300 mm |
Width | 1040 mm |
Depth | 720 mm |
Weight | 270 Kgs |
Transportation Ht | 1800 mm |
Power Supply | Single Phase 240v |
Motor | 1.5 KW 13 amp |
Pressing Force | Up to 4 Tonnes |
Noise Level | 72 Decibels |
Height | 698 mm |
Width | 700 mm |
Depth | 500 mm |
Height | 600 mm |
Width | 700 mm |
Depth | 500 mm |
Weight | Up to 75 Kgs |
Cycle time | 24 seconds |
Motor | 11 kW |
Platen Force | 50t |
Cycle Time | 32 sec |
Electrical | 415, 3-PHASE |
Overall (W x D x H) | 2030 x 1092 x 3620 mm |
Feed Height | 1232 mm |
Loading Aperture | 1524 x 705 mm |
Bale (W x D x H) | 1524 x 762 x 1220 mm |
Bale Weight (OCC) | Up to 550 kg |
Ejector System | Semi Automatic |
Baler Weight | 2045 kg |
Height | 1969 mm |
Width | 2050 mm |
Depth | 872 mm |
Weight | 562 Kgs |
Transportation Ht | 1969 mm |
Power Supply | Single Phase 240v |
Motor | 1.3 KW 13 amp |
Pressing Force | Up to 4 Tonnes |
Noise Level | 72 Decibels |
Width | 700 mm |
Depth | 500 mm |
Height | 1000 mm |
Width | 700 mm |
Depth | 500 mm |
Weight | Up to 75 Kgs |
Cycle time | 35 seconds |
Height | 2300 mm |
Width | 1040 mm |
Depth | 720 mm |
Weight | 270 Kgs |
Transportation Ht | 1800 mm |
Power Supply | Single Phase 240v |
Motor | 1.5 KW 13 amp |
Pressing Force | Up to 4 Tonnes |
Noise Level | 72 Decibels |
Height | 698 mm |
Width | 700 mm |
Depth | 500 mm |
Height | 1000 mm |
Width | 700 mm |
Depth | 500 mm |
Weight | Up to 75 Kgs |
Cycle time | 24 seconds |
Height | 2600 mm |
Width | 1560 mm |
Depth | 1030 mm |
Weight | 780 Kgs |
Power Supply | Single Phase 240v |
Motor | 2.2 Kw |
Pressing Force | Up to 10 Tonnes |
Noise Level | 72 Decibels |
Height | 470 mm |
Width | 975 mm |
Height | 1000 mm |
Width | 975 mm |
Depth | 800 mm |
Weight | Up to 150 Kgs |
Cycle time | 40 seconds |
Height | 2469 mm |
Width | 3032 mm |
Depth | 1269 mm |
Weight | 1400 Kgs |
Transportation Ht | 2469 mm |
Power Supply | Single Phase 240v |
Motor | 2.2 KW 16 amp |
Pressing Force | Up to 22 Ton |
Noise Level | 74 Decibels |
Width | 1074 mm |
Depth | 800 mm |
Height | 1000 mm |
Width | 1074 mm |
Depth | 800 mm |
Weight | Up to 250 Kgs |
Cycle time | 34 seconds |
Height | 2990 mm |
Width | 1500 mm |
Depth | 980 mm |
Weight | 985 Kgs |
Transportation Ht | 2250 mm |
Power Supply | Single Phase 240v |
Motor | 2.2 KW 16 amp |
Pressing Force | Up to 20 Tonnes |
Noise Level | 74 Decibels |
Height | 678 mm |
Width | 1200 mm |
Depth | 800 mm |
Height | 1000 mm |
Width | 1200 mm |
Depth | 800 mm |
Weight | Up to 250 Kgs |
Cycle time | 34 seconds |
Height | 2120 mm |
Width | 1160 mm |
Depth | 1150 mm |
Weight | 270 Kgs |
Transportation Ht | 1650 mm |
Power Supply | Single Phase 240v |
Motor | 1.5KW 13 amp |
Pressing Force | Up to 4 Tonnes |
Noise Level | 72 Decibels |
Cycle time | 20 seconds |
Model Type | ET-16ST | ET-18ST | ET-20ST | ET-22ST | ET-24ST |
---|---|---|---|---|---|
Motor | 5.5kW | 5.5kW | 5.5kW | 5.5kW | 5.5kW |
Supply 3ø50~415V | 16A | 16A | 16A | 16A | 16A |
Compaction Force | 34t | 34t | 34t | 34t | 34t |
Cycle Time | 52 sec | 52 sec | 52 sec | 52 sec | 52 sec |
Capacity | 16m3 | 18m3 | 20m3 | 22m3 | 24m3 |
Volume/stroke | 1.31m3 | 1.31m3 | 1.31m3 | 1.31m3 | 1.31m3 |
Volume/hr | 98m3 | 98m3 | 98m3 | 98m3 | 98m3 |
Length | 5320mm | 5520mm | 5920mm | 6400mm | 6800mm |
Length c/w tipper | 7480mm | 7680mm | 8080mm | 8560mm | 8960mm |
Width | 2470mm | 2470mm | 2470mm | 2470mm | 2470mm |
Height | 2670mm | 2670mm | 2670mm | 2670mm | 2670mm |
Filling Opening (L x W) | 2000 x 1800mm | 2000 x 1800mm | 2000 x 1800mm | 2000 x 1800mm | 2000 x 1800mm |
Filling Height | 1130mm | 1130mm | 1130mm | 1130mm | 1130mm |
Motor | 5.5 kW |
Power Supply | 415V 3ø50~16A |
Compaction Force | 34t |
Cycle Time | 35 sec |
Capacity | 8-12m3 |
Filling Opening (L x W) | 900 x 1510 mm |
Filling Height | 1230 mm |
Volume /stroke | 1m3 |
Volume/hr | 100m3 |
Total (L x W x H) | 4.2 x 1.9 x 2.1m |
Type | ET-15S | ET-15 | ET-20 | ET-25 | ET-30 |
---|---|---|---|---|---|
Motor | 7.5kW | 7.5kW | 11kW | 11kW | 11kW |
Supply 3ø50~415V | 32A | 32A | 32A | 32A | 32A |
Compaction Force | 34t | 34t | 38t | 38t | 38t |
Cycle Time | 39 sec | 40 sec | 50 sec | 55 sec | 60 sec |
Volume/hr | 103m3 | 96m3 | 140m3 | 180m3 | 240m3 |
Length | 1828mm | 3035mm | 3724mm | 4413mm | 5102mm |
Width | 1753mm | 1753mm | 1753mm | 1753mm | 1753mm |
Width inc S/M P/Pack | 2007mm | 2007mm | 2007mm | 2007mm | 2007mm |
Height ex Hopper | 1220mm | 1220mm | 1220mm | 1220mm | 1220mm |
Filling Opening (L x W) | 1066 x 1524mm | 1029 x 1524mm | 1372 x 1524mm | 1715 x 1524mm | 2040 x 1524mm |
Filling Height | 1220mm | 1220mm | 1220mm | 1220mm | 1220mm |
Type | ET-15S | ET-15 | ET-20 | ET-25 | ET-30 |
---|---|---|---|---|---|
Motor | 7.5kW | 7.5kW | 11kW | 11kW | 11kW |
Supply 3ø50~415V | 32A | 32A | 32A | 32A | 32A |
Compaction Force | 34t | 34t | 38t | 38t | 38t |
Cycle Time | 39 sec | 40 sec | 50 sec | 55 sec | 60 sec |
Volume/hr | 103m3 | 96m3 | 140m3 | 180m3 | 240m3 |
Length | 1828mm | 3035mm | 724mm | 4413mm | 5102mm |
Width | 1753mm | 1753mm | 1753mm | 1753mm | 1753mm |
Width inc S/M P/Pack | 2007mm | 2007mm | 2007mm | 2007mm | 2007mm |
Height excl. Hopper | 1220mm | 1220mm | 1220mm | 1220mm | 1220mm |
Filling Opening (L x W | 1066 x 1524mm | 1029 x 1524mm | 1372 x 1524mm | 1715 x 1524mm | 2040 x 1524mm |
Filling Height | 1220mm | 1220mm | 1220mm | 1220mm | 1220mm |