Hazardous waste comes from several different processes and different forms; getting it wrong can be costly to your business. Our specialist team helps customers safely store, transport and remove all kinds of hazardous waste.
Business Sector | Waste Type |
---|---|
All sectors | Fluorescent tubes (WEEE fridges/monitors/air con units), batteries, clinical waste, feminine hygiene. |
Industrial | Aerosols and paints (waste and solvent-based), residues (adhesives, resins, curing agents), drummed chemical wastes (acid, alkalis, sludges), bulk liquids and washings. |
Automotive | Thinners, oil, aerosols, antifreeze and brake fluids, drummed contaminated spills and rags, lead-acid batteries, oil filters and tyres. |
Offices | Air con units, batteries, fridges/freezers, monitors, laptops, non-haz WEEE (telephones, fans, fax machines, mice, keyboards, cables, scanners, base units, printers). |
Construction | Adhesives, aerosols, curing agents, drummed contaminated rags, lead acid batteries, solvent-based resin, spillages and oil. |
Hotels | Non-haz WEEE (telephones, fans, fax machines, mice, keyboards, cables, scanners, base units, printers, clinical, monitors, washing machines and dishwashers). |
If you’re not sure what hazardous waste you have on-site, we can help. One of our qualified chemists will attend the site to take samples, repack and label your waste giving you peace of mind.
Chemical waste types include the following:
We have several different UN-approved containers, depending on the volume or waste type. A member of our team will recommend the correct container to match the waste type.
Bulk pumpable liquids
Paint tins, contaminated rags, aerosols, loose signal items.
Pumpable liquids (solvent and thinner), solids, paint tins, contaminated rags, aerosols, and loose signal items.
Pumpable liquids (food, acids), paint tins, contaminated rags, aerosols, and loose signal items.
Every movement of chemicals or WEEE waste requires a consignment note by law which you must keep on record for 3 years. A note is needed for all movements of hazardous waste, including collections by registered waste carriers and movements between premises within the same business, as it tracks the waste from collection to disposal. Evolve will provide you will the relevant documentation needed to transport the waste from your premises to the end disposal point, providing you with a full audit trail of all waste movements.
Register NowWaste producers no longer need to register with an environment agency before hazardous waste collections. This means any previous registrations become invalid. However, you still need to supply your hazardous waste contractor(s) with a 6-digit code for them to complete any hazardous waste consignment note. This code needs to be relayed to all contractors and used consistently for all hazardous waste. The EA requires you to use the first 6 digits of your company name as this code. If your name is shorter than 6 digits, the shortfall is made up with ‘q’s. You will need to confirm the 6-digit code.
A member of our team will be in contact with you shortly.
We provide an end-to-end service to ensure you have a fully bespoke, compliant and safe solution that brings you complete peace of mind.
Baler Dimensions L X W x H | 5695mm x 1385mm x 2190mm |
Baler Weight Tonnes | 5 Tonnes |
Bale Size W x H | 750mm x 1100mm |
Bale Length | Variable |
Bale Weight | 450-650 Kgs depending on material |
No of Bale Ties | 4 Wire or Tape |
Loading Aperture | 1250mm x 750mm |
Safety Circuits | Dual Channel Cat 4 |
Control Voltage | 24 Volt |
Switch Gear | PLC Controlled |
Motor Size | 11 Kw |
Cylinder Bore | 152mm |
Compaction Force @ 200 bar* | 38 Ton |
Cutting Face on Baler Cross Bar | Serrated V Shape Blades |
Cutting Face on Packing Blade | Anvil Shear Blades |
End Door Type | Manual |
Full Bale Eject of Each Individual Bale | Included |
Cycle Time | 74 Secs (Std) : 48 Secs (Optional) |
CE Compliant | Yes |
Height | 1990 mm |
Width | 1800 mm |
Depth | 1100 mm |
Weight | 1140 Kgs |
Power Supply | Single Phase 220-240V |
Motor | 2.2 KW 16 amp |
Pressing Force | Up to 20 Tonnes |
Noise Level | 68 Decibels |
Cycle Time | 45 Seconds |
Height | 600 mm |
Width | 1200 mm |
Depth | 800 mm |
Height | 1000 mm |
Width | 1200 mm |
Depth | 800 mm |
Weight | Up to 300 Kgs (Depending on material) |
Height | 2300 mm |
Width | 1040 mm |
Depth | 720 mm |
Weight | 270 Kgs |
Transportation Ht | 1800 mm |
Power Supply | Single Phase 240v |
Motor | 1.5 KW 13 amp |
Pressing Force | Up to 4 Tonnes |
Noise Level | 72 Decibels |
Height | 698 mm |
Width | 700 mm |
Depth | 500 mm |
Height | 600 mm |
Width | 700 mm |
Depth | 500 mm |
Weight | Up to 75 Kgs |
Cycle time | 24 seconds |
Motor | 11 kW |
Platen Force | 50t |
Cycle Time | 32 sec |
Electrical | 415, 3-PHASE |
Overall (W x D x H) | 2030 x 1092 x 3620 mm |
Feed Height | 1232 mm |
Loading Aperture | 1524 x 705 mm |
Bale (W x D x H) | 1524 x 762 x 1220 mm |
Bale Weight (OCC) | Up to 550 kg |
Ejector System | Semi Automatic |
Baler Weight | 2045 kg |
Height | 1969 mm |
Width | 2050 mm |
Depth | 872 mm |
Weight | 562 Kgs |
Transportation Ht | 1969 mm |
Power Supply | Single Phase 240v |
Motor | 1.3 KW 13 amp |
Pressing Force | Up to 4 Tonnes |
Noise Level | 72 Decibels |
Width | 700 mm |
Depth | 500 mm |
Height | 1000 mm |
Width | 700 mm |
Depth | 500 mm |
Weight | Up to 75 Kgs |
Cycle time | 35 seconds |
Height | 2300 mm |
Width | 1040 mm |
Depth | 720 mm |
Weight | 270 Kgs |
Transportation Ht | 1800 mm |
Power Supply | Single Phase 240v |
Motor | 1.5 KW 13 amp |
Pressing Force | Up to 4 Tonnes |
Noise Level | 72 Decibels |
Height | 698 mm |
Width | 700 mm |
Depth | 500 mm |
Height | 1000 mm |
Width | 700 mm |
Depth | 500 mm |
Weight | Up to 75 Kgs |
Cycle time | 24 seconds |
Height | 2600 mm |
Width | 1560 mm |
Depth | 1030 mm |
Weight | 780 Kgs |
Power Supply | Single Phase 240v |
Motor | 2.2 Kw |
Pressing Force | Up to 10 Tonnes |
Noise Level | 72 Decibels |
Height | 470 mm |
Width | 975 mm |
Height | 1000 mm |
Width | 975 mm |
Depth | 800 mm |
Weight | Up to 150 Kgs |
Cycle time | 40 seconds |
Height | 2469 mm |
Width | 3032 mm |
Depth | 1269 mm |
Weight | 1400 Kgs |
Transportation Ht | 2469 mm |
Power Supply | Single Phase 240v |
Motor | 2.2 KW 16 amp |
Pressing Force | Up to 22 Ton |
Noise Level | 74 Decibels |
Width | 1074 mm |
Depth | 800 mm |
Height | 1000 mm |
Width | 1074 mm |
Depth | 800 mm |
Weight | Up to 250 Kgs |
Cycle time | 34 seconds |
Height | 2990 mm |
Width | 1500 mm |
Depth | 980 mm |
Weight | 985 Kgs |
Transportation Ht | 2250 mm |
Power Supply | Single Phase 240v |
Motor | 2.2 KW 16 amp |
Pressing Force | Up to 20 Tonnes |
Noise Level | 74 Decibels |
Height | 678 mm |
Width | 1200 mm |
Depth | 800 mm |
Height | 1000 mm |
Width | 1200 mm |
Depth | 800 mm |
Weight | Up to 250 Kgs |
Cycle time | 34 seconds |
Height | 2120 mm |
Width | 1160 mm |
Depth | 1150 mm |
Weight | 270 Kgs |
Transportation Ht | 1650 mm |
Power Supply | Single Phase 240v |
Motor | 1.5KW 13 amp |
Pressing Force | Up to 4 Tonnes |
Noise Level | 72 Decibels |
Cycle time | 20 seconds |
Model Type | ET-16ST | ET-18ST | ET-20ST | ET-22ST | ET-24ST |
---|---|---|---|---|---|
Motor | 5.5kW | 5.5kW | 5.5kW | 5.5kW | 5.5kW |
Supply 3ø50~415V | 16A | 16A | 16A | 16A | 16A |
Compaction Force | 34t | 34t | 34t | 34t | 34t |
Cycle Time | 52 sec | 52 sec | 52 sec | 52 sec | 52 sec |
Capacity | 16m3 | 18m3 | 20m3 | 22m3 | 24m3 |
Volume/stroke | 1.31m3 | 1.31m3 | 1.31m3 | 1.31m3 | 1.31m3 |
Volume/hr | 98m3 | 98m3 | 98m3 | 98m3 | 98m3 |
Length | 5320mm | 5520mm | 5920mm | 6400mm | 6800mm |
Length c/w tipper | 7480mm | 7680mm | 8080mm | 8560mm | 8960mm |
Width | 2470mm | 2470mm | 2470mm | 2470mm | 2470mm |
Height | 2670mm | 2670mm | 2670mm | 2670mm | 2670mm |
Filling Opening (L x W) | 2000 x 1800mm | 2000 x 1800mm | 2000 x 1800mm | 2000 x 1800mm | 2000 x 1800mm |
Filling Height | 1130mm | 1130mm | 1130mm | 1130mm | 1130mm |
Motor | 5.5 kW |
Power Supply | 415V 3ø50~16A |
Compaction Force | 34t |
Cycle Time | 35 sec |
Capacity | 8-12m3 |
Filling Opening (L x W) | 900 x 1510 mm |
Filling Height | 1230 mm |
Volume /stroke | 1m3 |
Volume/hr | 100m3 |
Total (L x W x H) | 4.2 x 1.9 x 2.1m |
Type | ET-15S | ET-15 | ET-20 | ET-25 | ET-30 |
---|---|---|---|---|---|
Motor | 7.5kW | 7.5kW | 11kW | 11kW | 11kW |
Supply 3ø50~415V | 32A | 32A | 32A | 32A | 32A |
Compaction Force | 34t | 34t | 38t | 38t | 38t |
Cycle Time | 39 sec | 40 sec | 50 sec | 55 sec | 60 sec |
Volume/hr | 103m3 | 96m3 | 140m3 | 180m3 | 240m3 |
Length | 1828mm | 3035mm | 3724mm | 4413mm | 5102mm |
Width | 1753mm | 1753mm | 1753mm | 1753mm | 1753mm |
Width inc S/M P/Pack | 2007mm | 2007mm | 2007mm | 2007mm | 2007mm |
Height ex Hopper | 1220mm | 1220mm | 1220mm | 1220mm | 1220mm |
Filling Opening (L x W) | 1066 x 1524mm | 1029 x 1524mm | 1372 x 1524mm | 1715 x 1524mm | 2040 x 1524mm |
Filling Height | 1220mm | 1220mm | 1220mm | 1220mm | 1220mm |
Type | ET-15S | ET-15 | ET-20 | ET-25 | ET-30 |
---|---|---|---|---|---|
Motor | 7.5kW | 7.5kW | 11kW | 11kW | 11kW |
Supply 3ø50~415V | 32A | 32A | 32A | 32A | 32A |
Compaction Force | 34t | 34t | 38t | 38t | 38t |
Cycle Time | 39 sec | 40 sec | 50 sec | 55 sec | 60 sec |
Volume/hr | 103m3 | 96m3 | 140m3 | 180m3 | 240m3 |
Length | 1828mm | 3035mm | 724mm | 4413mm | 5102mm |
Width | 1753mm | 1753mm | 1753mm | 1753mm | 1753mm |
Width inc S/M P/Pack | 2007mm | 2007mm | 2007mm | 2007mm | 2007mm |
Height excl. Hopper | 1220mm | 1220mm | 1220mm | 1220mm | 1220mm |
Filling Opening (L x W | 1066 x 1524mm | 1029 x 1524mm | 1372 x 1524mm | 1715 x 1524mm | 2040 x 1524mm |
Filling Height | 1220mm | 1220mm | 1220mm | 1220mm | 1220mm |